Practical Printing

A fairly deep review of the new FlashForge USA Artemis Printer- targeted from the perspective of the intended use case- the education world. During the review process, I had logged over 200 hours of live printing on this machine over on https://www.twitch.tv/makerdeck. I had also unboxed and fired up the first print live on Twitch on my channel there. The VOD will be public until twitch cycles it out at https://www.twitch.tv/crussty3d If you would like to learn more about this particular unit, you can check out: https://flashforge-usa.com/products/flashforge-artemis-3d-printer If you are an educator and would like to learn more about their education bundles, check out: https://flashforge-usa.com/pages/flashforge-artemis-3d-printer-education-bundle If you are interested in picking one up, they are available on Amazon (US) with prime shipping: https://amzn.to/3LdFwzU (affiliate) ********************************************************* DISCLOSURE: This printer was provided to me at no cost for review via representatives of FlashForge USA. I was not compensated monetarily in any way for my opinions or time, but I was allowed to keep the printer. As this video was intended to be timed around the product release date, FlashForge was afforded a pre-screening of the video, however I was not asked to change any content before release. Additionally, I was afforded a period of time to make suggestions for improvements to the FlashForge team, so many of the negatives I point out in this video have already been suggested for improvement. ********************************************************* Did you know I also stream on Twitch? Follow at https://www.twitch.tv/crussty3d for notifications on when I go live! ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! Interested in learning more about MakerDeck? Check us out on Twitch at: https://www.twitch.tv/makerdeck I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

I am building the LDO Kit for the Voron 2.4-350mm. In this first segment, I get it unboxed and show off the how well LDO packaged the kit. I will be streaming most of the build live in pieces, focusing on interacting with the chat as much as possible and answering questions along the way. I hope you enjoy and find this helpful. This is an export from the live Twitch stream. -- Watch it live before being archived here at https://www.twitch.tv/crussty3d ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! https://pp3d.me/f1pp Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Prusa Printers: https://pp3d.me/Prusa MatterHackers: https://pp3d.me/mhpp Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Lets get the 2021 FilamentOne Gift train out of the station! The train will be stopping by many of your favorite streamers stations on both YouTube and Twitch during the week leading up to Christmas 2021. Be sure to catch them all for your chances at Great prizes, including Ultistik flex plates, Filament and much more! Over the course of the week, the Gift Train will be stopping by DWIT3D, Loyal Moses, Bwana, Live Via, DB3D_Dan and Father funks channels. Possibly even a few more surprise stops along the way... who knows??? All items being given away are curtesy of FilamentOne and Ultistik. More details will be provided during the stream- but it will be international, and you must be present to win! ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! https://pp3d.me/f1pp Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Prusa Printers: https://pp3d.me/Prusa MatterHackers: https://pp3d.me/mhpp Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Let take a quick first look at the new Premium PEI Powder-coated Flex sheet made by OSEQ in Czech Republic. The "Safe Sheet" has some nice features that make it stand out from other plates on the market. In this video we will do a quick overview, and I will follow this up with a full review once I have more time with the plates. Check it out over at https://oseq.io/ ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! http://www.filamentone.com/discount/PracticalPrinting Use code 'PracticalPrinting' at checkout. Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Tonight we will look at the new Artillery3D X2 printer side by side with their original X1. We'll look at the new features that have been added, and improvements that have been made to the platform. Time permitting, we might also take a look at installing the Ultistik flex-plate system on the printer. For more details on the X2 check out: https://3dp.to/pDq2w or https://artillery3d.com This printer was provided to Practical Printing for purposes of evaluation and making content with the printer. No money exchanged hands in either direction. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! https://pp3d.me/f1pp Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Prusa Printers: https://pp3d.me/Prusa MatterHackers: https://pp3d.me/mhpp Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Tonight we will look at the new Artillery3D X2 printer side by side with their original X1. We'll look at the new features that have been added, and improvements that have been made to the platform. Time permitting, we might also take a look at installing the Ultistik flex-plate system on the printer. For more details on the X2 check out: https://3dp.to/pDq2w or https://artillery3d.com This printer was provided to Practical Printing for purposes of evaluation and making content with the printer. No money exchanged hands in either direction. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! https://pp3d.me/f1pp Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Prusa Printers: https://pp3d.me/Prusa MatterHackers: https://pp3d.me/mhpp Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Tonight we will look at the new Artillery3D X2 printer side by side with their original X1. We'll look at the new features that have been added, and improvements that have been made to the platform. Time permitting, we might also take a look at installing the Ultistik flex-plate system on the printer. For more details on the X2 check out: https://3dp.to/pDq2w or https://artillery3d.com This printer was provided to Practical Printing for purposes of evaluation and making content with the printer. No money exchanged hands in either direction. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! https://pp3d.me/f1pp Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Prusa Printers: https://pp3d.me/Prusa MatterHackers: https://pp3d.me/mhpp Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

2020 has been a crazy year- let's say goodbye to it and welcome in 2021 with an unboxing of Artillery 3D's latest printer- the new Hornet! We can also take a quick look at the new Edgee Follow camera accessory! For more details on the Hornet Pre-sale check out: https://3dp.to/b3XB0 Special thanks to @GRAFITOMI for his help with the thumbnail! ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! http://www.filamentone.com/discount/PracticalPrinting Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below.  These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

I found a quick easy way to turn a solid vase model intended for FDM spiral vase printing into a hollow vase that can be printed on an SLA/MSLA printer using only Prusa Slicer. It's a quick easy process and a fun way to make vase prints. Remember, a vase on an SLA/MSLA print is essentially a big suction cup, so you HAVE to add a hole in the bottom of you vase and plug it up later. Model shown in this video example: https://www.prusaprinters.org/prints/7308-spiral-vase/files ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! I keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! http://www.filamentone.com/discount/PracticalPrinting Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

FillamentOne is celebrating the 1 year anniversary of the PROFI box this year with a huge giveaway! This giveaway is open world wide too! You can learn more and enter to win here: https://gleam.io/kUJ3R/1st-profi-box-anniversary-giveaway ***** Check this link often as new ways to win will be periodically added! This video was published at the request of FilamentOne to help promote their giveaway and is considered a sponsored video, however no money, products or other goods were exchanged for this endorsement. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate anI earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Wanna save some loot on your purchases over at FilamentOne? Use this link and code to save yourself 5% off every order, and help support the channel at the same time! http://www.filamentone.com/discount/PracticalPrinting Use code 'PracticalPrinting' at checkout. You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

In this episode of SLA 101, I'll show you how to clean your vat to prepare it for changing resins or replacing the FEP sheet. ********************************************************* In this video, I showcase the new Resin starter kit available over at FilamentOne. If you would like to check it out you can see the use the affiliate link below. ADDED BONUS: use the code "PracticalPrinting" at checkout to receive an additional 5% off your order!!! https://www.filamentone.com/products/3d-printing-resin-accessory-set-with-slap-mat?_pos=1&_sid=d9983f9d3&_ss=r&aff=1 ********************************************************* When dealing with resins, please always read and adhere to the manufacturers safe handling and processing procedures. This should be found in the resin’s MSDS/SDS forms, which they are LEGALLY obligated to provide to you. If a manufacturer does not make this available online, ask them for it- if they still cannot provide, move on to a different resin. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

The Pico Hybrid that I discussed on the channel way back in 2017 is being resurrected by METAFORM and should be available soon for Pre-order. Lets talk about this quick and what it could bring to the table! ********************************************************* Interested in the pre-order on this, or just want more information? Check out: https://metaform.us ********************************************************* Check out my original first look at this back in 2017: https://youtu.be/OByhHPi54SM ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links https://www.amazon.com/shop/crussty Or Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: https://goo.gl/JZLovC Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

With the Peopoly Phenom now shipping, I thought it might be good to host a quick stream to allow people to ask questions about this amazing new Super Sized mSLA printer.  We’ll have folks from Peopoly in the chat to help field questions and make notes on users comments and suggestions. ********************************************************* If you’d like to pick a Peopoly Phenom, there are currently two ways to order. If you are in the US, you can order the Phenom at MatterHackers with free shipping (aff link): https://tinyurl.com/y532hkac The Phenom is also available world wide from Peopoly direct (aff link): http://bit.ly/2OOVUMe ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! As an Amazon Associate I earn from qualifying purchases through these links. https://www.amazon.com/shop/crussty Or  Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 You can also support the channel by using the affiliate links below.  These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

In this first episode of SLA 101, I show you how to use resin and a UV source to weld your parts together. When done properly, this creates a bond as strong as the individual layers of the print. Note, that contrary to what I do in the video, I should have been gloved up for this process. I was not expecting any contact with the resin (boy was I wrong…) and opted not to, but I should not have take the risk. When dealing with resins, please always read and adhere to the manufacturers safe handling and processing procedures. This should be found in the resin’s MSDS/SDS forms, which they are LEGALLY obligated to provide to you. If a manufacturer does not make this available online, ask them for it- if they still cannot provide, move on to a different resin. Note: This is a re-post of my earlier tutorial on SLA Resin Welding as somehow the video disappeared from the YT library. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

In part three of this series, I will be showing you how to get your K40 with the Cohesion3D Laserboard connected to LightBurn software and get you primed for making your first cuts. This upgrade is sponsored by Cohesion3d and Lightburn. ********************************************************* The LightBurn Video tutorials mentioned in this video can be found at: https://lightburnsoftware.com/pages/tutorials Additional help and documentation on LightBurn can be accessed online at: https://forum.lightburnsoftware.com ********************************************************* To learn more about the Cohesion3D Laser board, check out: https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/ If you are curious about the LightBurn software, check out: https://lightburnsoftware.com And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects… Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel. Example from Amazon: https://amzn.to/2XvdCJw ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

In part two of this series, I will be showing you the different firmware options for use on the Cohesion3D Laserboard when upgrading the K40 laser and how to install the Cluster variant. It’s a quick and easy process. In the third and final episode, I will cover setting up Lightburn software to run it. This upgrade is sponsored by Cohesion3d and Lightburn. ********************************************************* Forum pages showing in the video: LaserBoard Firmware + Config Stock Files on Memory Card https://forum.cohesion3d.com/t/laserboard-firmware-config-stock-files-on-memory-card/96 Improved Raster Speed Firmware Update for Cohesion3D Boards! https://forum.cohesion3d.com/t/improved-raster-speed-firmware-update-for-cohesion3d-boards/850 Setting Up the Correct Bed Size https://forum.cohesion3d.com/t/setting-up-the-correct-bed-size/492 ********************************************************* To follow along with the installation, I’d suggest starting at: https://cohesion3d.com/start/ Cohesion3d Support Forums can be found here: https://forum.cohesion3d.com ********************************************************* To learn more about the Cohesion3D Laser board, check out: https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/ If you are curious about the LightBurn software, check out: https://lightburnsoftware.com And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects… Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel. Example from Amazon: https://amzn.to/2XvdCJw ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Thanks to the good folks over at FilamentOne.com, I was given an opportunity to get my hands on and play with a Frozen Shuffle for awhile- So it’s time to get Up Close and Personal with it! With a great feature set and sound build, this is a fairly high end machine designed for the serious user. I think it is targeted more towards the Pro-sumer / Business / Dental / Jewelry markets, but it is also suited for any serious hobbyist or home user. Disclaimer: This video is not a paid promotion or endorsement. I was provided the unit free of charge as a 'loaner' to test and use for content, and will be returning it when testing is complete. ********************************************************* If you’d like to pick up a Shuffle or any of it’s siblings such at the Larger XL or the new 4K for yourself- or you just want more information, check out: https://www.filamentone.com/collections/phrozen-3d As an added bonus, use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!) ********************************************************* Models shown in this Video: Captain America bust by Eastman: https://www.myminifactory.com/object/3d-print-captain-america-bust-71146 Piggy Sitting(Sir Pigglesfree) by Loubie3D https://www.myminifactory.com/object/3d-print-piggy-sitting-sir-pigglesfree-single-extrusion-version-96702 Open Source Hardware Ring by DjSplitterPro https://www.thingiverse.com/thing:358031 SLA_Icosohedron by Brandon Plumbo https://www.prusaprinters.org/prints/1466-sla_icosohedron And last, but not least… Voodoo Bree by Arte Creator https://www.myminifactory.com/object/3d-print-voodoo-bree-95797 ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Isopropyl Alcohol (IPA) commonly used to clean and post process SLA prints get dirty after repeated use with the contaminants that are washed away. In this episode of SLA 101, while it is not the most efficient process, I’ll show you how to recover as much as possible so you can minimize waste and reuse it. Also, if you don’t stay for the entire process, please tune in towards the end for a very important safety message about resin and resin handling. ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

In part one of this series, I will be upgrading the generic K40 Laser with a Cohesion3D Laserboard. It’s a quick and easy process. In future episodes, I will cover installing firmware onto the board, and setting up Lightburn software to run it. This upgrade is sponsored by Cohesion3d and Lightburn. ********************************************************* To follow along with the installation, I’d suggest starting at: https://cohesion3d.com/start/ Cohesion3d Support Forums can be found here: https://forum.cohesion3d.com ********************************************************* To learn more about the Cohesion3D Laser board, check out: https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/ If you are curious about the LightBurn software, check out: https://lightburnsoftware.com And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects… Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel. Example from Amazon: https://amzn.to/2XvdCJw ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

I will be doing and documenting the process of upgrading the generic K40 Laser with a Cohesion3D Laserboard and setting up LightBurn software to run it. Before I film that process, I thought I would put out this quick “teaser” to allow viewers to submit questions in the comments below so that I could address them at the time of the upgrade. This upgrade is sponsored by Cohesion3d and Lightburn. ********************************************************* To learn more about the Cohesion3D Laser board, check out: https://cohesion3d.com/shop/controllers/cohesion3d-laserboard/ If you are curious about the LightBurn software, check out: https://lightburnsoftware.com And if you are interested in the K40 laser or wish to pick one up, they are available on eBay, Amazon or any of the other usual suspects… Note: the ones with the “Analog” control panel are recommended over the ones with the “New Digital” control panel. Example from Amazon: https://amzn.to/2XvdCJw ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

This is the first episode of a new series I am working on called SLA 101. Each episode will cover different topics to help beginners get the fast track to printing with the SLA printers. My hope is to keep this as generic as possible so it is not limited to one brand, or type of SLA printer- but rather cover topics that should apply to all of them. This first episode is on Resin Welding. This technique is handy because it is a simple way to “weld” together printed parts without any additional glues, etc. While in the video I show this process being done on already post processed prints, I’m told now that it actually works best if you can weld the pieces after they have been washed, but before they have their final curing. I have not tried this yet, so… YMMV… ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

I was part of the beta program forPrusa SL1 and CW1 units, so I got and early chance to put it through it’s paces. Last week we took a close up look at the SL1 Printer. Now it’s time to see what the CW1 Curing and Washing station is all about! ********************************************************* Check out the SL1 and CW1 at Prusa’s shop here for more specs and details: https://shop.prusa3d.com/en/52-original-prusa-sl1 ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

I was part of the beta program forPrusa SL1 and CW1 units, so I got and early chance to put it through it’s paces. Now that the Prusa SL1 is shipping, let’s take a close look at the machine itself. ********************************************************* Check out the SL1 and CW1 at Prusa’s shop here for more specs and details: https://shop.prusa3d.com/en/52-original-prusa-sl1 ********************************************************* Just a few of the models I showed in this video close up: PowderPuff Unicorn by ChaosCoreTech (Chelsey) https://www.thingiverse.com/thing:3621871 Man of Steel Bust by Eastman https://www.myminifactory.com/object/3d-print-superman-bust-63635 Light Cycle by AngryTiki https://www.thingiverse.com/thing:1782640 Tree frog for SLA/DLP printers by scobo https://www.thingiverse.com/thing:3124861 Vine Egg by bugman_140 https://www.thingiverse.com/thing:3561971 Squizzle! A Supports Free Squirrel Sculpt by loubie https://www.thingiverse.com/thing:2522823 Bilbo Baggins by andre1jr https://www.thingiverse.com/thing:610360 The Elder Lighthouse by Jukka Seppänen (kijai) https://www.myminifactory.com/object/3d-print-the-elder-lighthouse-71894 Sonic The Hedgehog by Tariq Ali (3DGuyDubai) https://www.3dprintinggeek.net/product-page/sonic-the-hedgehog-use-promocode-sonic-get-it-free ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

#PimpMyPrusa is Back! Time to update the Prusa MK3 again to the R3 release. So the Carbodeon uDiamond filament WAS going to make a great Retro Looking Prusa. The parts were smooth and buttery… It WAS going to be ugly and beautiful and worn and warm… But it’s not... BIG FAIL!!! So much disappointment…. :( Upwards and onwards! Time to call in reinforcements and move on to Plan FF… Stay tuned for the conclusion… ********************************************************* You can learn more about the Carbodeon uDiamond filament here: https://carbodeon.com/product/udiamond/ Check out Stefan’s (CNC Kitchen) review of this filament here: https://youtu.be/OKryzuUQ5JM ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi ********************************************************* Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Geeetech sent me the A20M at no cost to me to review and play with, so I took the time to walk through not only the unboxing, but also the assembly. While I’m at it, I point out notable features- as well as some things that I don’t like about the design. A more comprehensive review will be done after some time with the printer. This is a VERY long video as I wanted to cover this in detail, so please feel free to scan through it. Special thanks to 3DMakerNoob for his spoof intro! If you don’t follow him, you are missing out! Check out his channel at: https://bit.ly/2qgQgb7 Special thanks to Joel Telling for help on the video thumbnail. Of course you all know 3DPrintingNerd right??? http://3d.pn ********************************************************* You can get the A20M direct from Geeetech here. Use code WCDSW to save $30! https://www.geeetech.com/220.html Or on Amazon US: https://amzn.to/2TPLUlr Or on Amazon UK: (Coming soon!) You can check out the FilamentOne GLINT Filaments that I used here: https://www.filamentone.com/collections/3d-printing-filament As an added bonus, use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!) ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

To celebrate the launch of their PRO Select filament, FilamentOne has sponsored an awesome giveaway! It's time to announce the winners!!! Congratulations to all 5 of the lucky winners. Didn't win a prize? You're still a winner!!! Use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!) You can check out FilamentOne Here: https://www.filamentone.com/collections/3d-printing-filament ********************************************************* You can check out the AnyCubic Chiron that was the Grand Prize here: http://www.anycubic3d.com/products/show/1356.html Or on Amazon: https://amzn.to/2swwir1 Or on Amazon UK: https://amzn.to/2RQxfc4 ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

To celebrate the launch of their PRO Select filament, FilamentOne has sponsored an awesome giveaway! This giveaway is open world wide (winners are responsible for any taxes/tariffs in their country) and will end at the stroke of midnight on January 31st, US Pacific time. Enter to win at: https://gleam.io/LPbfY/get-your-glint-on-the-giveaway Prizes are to be: Grand Prize- Anycubic Chiron 2nd Winner- 5 rolls of PRO SELECT filament 3rd Winner- 3 rolls of PRO SELECT filament 4th Winner- 1 roll of PRO SELECT filament 5th Winner- $10 FilamentOne gift card  ********************************************************* You can check out FilamentOne Here: https://www.filamentone.com/collections/3d-printing-filament As an added bonus, use code 'PracticalPrinting' at checkout to receive a 5% discount of your orders!!! (Not an affiliate link, just a way to save some loot!) Also, you can check out the AnyCubic Chiron that is the Grand Prize here: http://www.anycubic3d.com/products/show/1356.html Or on Amazon: https://amzn.to/2swwir1 Or on Amazon UK: https://amzn.to/2RQxfc4 ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

This is a quick tutorial on how to setup and use Virtual Extruders on printers with mixing hotends such as the Geeetech A10M and A20M. I used Simplify3D for this tutorial because the interface showed well on camera, but because this process is mostly in the startup script, ANY slicer that supports multi-extruders will work. The startup Gcode for this process is: M163 S0 P1.00 ; Set Left to 100% M163 S1 P0.00 ; Set Right to 0% M164 S0 ; Save Mix M163 S0 P0.00 ; Set Left to 0% M163 S1 P1.00 ; Set Right to 100% M164 S1 ; Save Mix M163 S0 P0.50 ; Set Left to 50% M163 S1 P0.50 ; Set Right to 50% M164 S2 ; Save Mix Etc…. Remember on the M164 command, this is the number of the extruder/Toolhead you will assign, minus 1. i.e. S0 = Extruder 1, S1 = Extruder2, S2 = Extruder 3 (first virtual extruder), etc. If you would like to pick up an A10M, they are available here: Amazon US : https://amzn.to/2LDAHRC Amazon UK: https://amzn.to/2RhFFJ7 Or WorldWide: https://www.geeetech.com/152.html If you would like to pick up an A20M, they are available here: Amazon US : https://amzn.to/2LzWPN0 Amazon UK: https://amzn.to/2Agskai Or WorldWide: https://www.geeetech.com/173.html ** Above are all affiliate links ********************************************************* Models shown: Low-Poly Charmander - Multi and Dual Extrusion version by Flowalistik: https://www.thingiverse.com/thing:1834722 (Sorry I didn’t mention this in the video!) Vine Christmas Tree by Bugman_140: https://www.thingiverse.com/thing:3253921 ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

I was order Numero Uno when I pre-ordered my Palette 2 Pro a few months back and it’s finally here! Here’s just a quick unboxing. Stay tuned for more once I get this hooked up and dialed in! Special thanks to Tom Jackson, AKA @FilamentFrenzy for the snazzy editing job on this so I could get it out quickly. If you aren’t already, give him a follow on twitter and watch his Youtube Channel for some great content to come! https://www.youtube.com/channel/UCGZ8JpWI39L0h3TvVyBfnmQ You can pick up a Palette 2 off Amazon right now here: US: https://amzn.to/2zH9CZe (affiliate link) Or a Palette 2 Pro when back in stock: US: https://amzn.to/2UgQRo4 (affiliate link) Or from Mosaic direct when back in stock: https://www.mosaicmfg.com ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon US: http://amzn.to/2gQC6Wg Amazon UK: https://amzn.to/2RCmnv9 MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Today we are live with the FilamentOne booth at World Maker Faire New York 2018! #WMFNY18 See the first siting of the all new Streamline Delta Printer as well as get a peak at the new FilamentOne PRO series filament!!! If you are at the Faire, stop by and say hi!!! ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

My custom RepBox from Repkord is here!!! Let's get it unboxed and put together. The RepBox is the ultimate wall mounted spool holder, and you can even get custom side panels! Best off- it's made for makers, by makers!!! Check it out here: https://www.repkord.com/repbox ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Let get this thing out of the box, put together and printing!!! If you aren't familiar with Geetechs newest OPEN SOURCE printer, it is a 2 color MIXING printer!!!!! Check out the link below for specs, details and pricing! https://www.geeetech.com/geeetech-a10m-mixcolor-3d-printer-p-1036.html (NON affiliate link) They are also available at Gearbest: https://goo.gl/oooY7y (Affiliate Link) Or over at Banggood: https://goo.gl/D2AG5R (Affilate Link) ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Let get this thing out of the box and put together! If you aren't familiar with Geetechs newest OPEN SOURCE printer, check out the link below for specs, details and special pricing! https://www.geeetech.com/103.html (affiliate link) ********************************************************* This printer was provided to Practical Printing at no cost from Geeetech for use in reviews and contact on the channel. If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Phone overheated, so lets try this again... Let get this thing out of the box and put together! If you aren't familiar with Geetechs newest OPEN SOURCE printer, check out the link below for specs, details and special pricing! https://www.geeetech.com/103.html (affiliate link) ********************************************************* This printer was provided to Practical Printing at no cost from Geeetech for use in reviews and contact on the channel. If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Totally pimped out the Prusa MK3 using all Fillamentum CPE filament. Since release, Prusa had released several updates to the printed parts so I not only wanted to incorporate these, but I wanted to do it in style! Not only did it get the updated parts, but also an E3D Gold edition hot-end. And did I mention it’s radical-active? That’s right! It’s just as pretty with the lights of and a black light fired up! #pimpmyprusa Special thanks to @3DPrinTek for the fan trick fan guard. If you are in Europe, check out his shop here: https://www.3dprintek.at Updated Prusa parts can be found on GitHub here: https://github.com/prusa3d/Original-Prusa-i3/tree/MK3/Printed-Parts/stl ********************************************************* I picked up the E3D Gold Edition hot-end from Fillamentone here: https://www.filamentone.com/collections/hotends/products/e3d-v6-gold-hotend-full-kit-1-75mm-24v I purchased the Fillamentum CPE Deep Sea Transpartent from Filamenone also: https://www.filamentone.com/collections/cpe-co-polyester-hg100/products/fillamentum-cpe-hg-100-deep-sea-transparent And of course the UV reactive Neon yellow CPE: https://www.filamentone.com/collections/cpe-co-polyester-hg100/products/fillamentum-cpe-extrafill-hg100-neon-yellow-transparent The replacement sleeving I used for the cabling was: 1/4in: https://amzn.to/2t2X8rI 3/8 in: https://amzn.to/2lfMMAn And 1/2 in: https://amzn.to/2MA4SJz ********************************************************* Both the See-Thru fan duct and the Zaribo edition control board case can be found in the Practical Printing collection on Thingiverse here: https://www.thingiverse.com/Crussty/collections/practical-printing-channel ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Practical Printing is an Amazon affiliate and links in the description above to products used in this video are from affiliate links.

Totally pimped out the Prusa MK3 using all Fillamentum CPE filament. Since release, Prusa had released several updates to the printed parts so I not only wanted to incorporate these, but I wanted to do it in style! Not only did it get the updated parts, but also an E3D Gold edition hot-end. And did I mention it’s radical-active? That’s right! It’s just as pretty with the lights of and a black light fired up! Be sure to watch to the end to see how this really shines!!! #pimpmyprusa Special thanks to @3DPrinTek for the fan trick fan guard. If you are in Europe, check out his shop here: https://www.3dprintek.at Updated Prusa parts can be found on GitHub here: https://github.com/prusa3d/Original-Prusa-i3/tree/MK3/Printed-Parts/stl ********************************************************* **** UPDATE: FilamentOne has offered up a discount to all Practical Printing fans! Use code 'PracticalPrinting' at checkout for a 5% discount. You can use this with the links below, or on anything you want to pickup- and the code doesn't expire! **** I picked up the E3D Gold Edition hot-end from Fillamentone here: https://www.filamentone.com/collections/hotends/products/e3d-v6-gold-hotend-full-kit-1-75mm-24v I purchased the Fillamentum CPE Deep Sea Transpartent from Filamenone also: https://www.filamentone.com/collections/cpe-co-polyester-hg100/products/fillamentum-cpe-hg-100-deep-sea-transparent And of course the UV reactive Neon yellow CPE: https://www.filamentone.com/collections/cpe-co-polyester-hg100/products/fillamentum-cpe-extrafill-hg100-neon-yellow-transparent The replacement sleeving I used for the cabling was: 1/4in: https://amzn.to/2t2X8rI 3/8 in: https://amzn.to/2lfMMAn And 1/2 in: https://amzn.to/2MA4SJz ********************************************************* Both the See-Thru fan duct and the Zaribo edition control board case can be found in the Practical Printing collection on Thingiverse here: https://www.thingiverse.com/Crussty/collections/practical-printing-channel ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Practical Printing is an Amazon affiliate and links in the description above to products used in this video are from affiliate links.

Welcome to Part 15 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. This is the finale! In Part 15, we complete steps 60 ~ 64, where we attach and wire up the effector, finish up all the trim pieces and power this bad boy up!!! Stay tuned for the follow up video on the configuration process of the Duet Board!!! ***** NOTE ***** At the time I received my kit, SeeMeCNC was including pre-assembled SE-300 effector/hotend modules in the kit. Since that time, they have changed it requiring, the builder to assemble their own hotend. I may do a follow up video on the assembly process of the SE-300 if the opportunity presents itself. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en The sub-manual for the Heated bed is here: https://seemecnc.dozuki.com/Guide/REV+10+Heated+Bed/79 ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 14 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In Parts 14, complete step 59, where we wire up the heat bed per the sub-manual. This one is a little long, but I opted not to break it up. I made some mistakes on this step and felt that it was important to show those, as well as the way I went about fixing them. ***EDIT*** As Vance mentioned below in the comments, I missed a step in the video on the bed. There is a little solder pad between the +1 and +2 points that needs to be bridged over to power the LED when the bed is heating. See the manual for details on this. Good catch Vance! You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en The sub-manual for the Heated bed is here: https://seemecnc.dozuki.com/Guide/REV+10+Heated+Bed/79 ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 13 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In Parts 13, we work our way through steps 53~58; wiring up the bulk of the base electronics. My apologies in advance about the oscillating camera focus. Not sure what was going on their, but the camera didn’t like the black parts against the black table. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 12b of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. This was intended to be a single part episode of the series, but it started getting a little long… In Parts 12a and 12b, we work our way through steps 46~52; wiring up the fuse panel, installing and wiring up the EZR Extruder and buttoning up the upper part of the printer. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 12a of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. This was intended to be a single part episode of the series, but it started getting a little long… In Parts 12a and 12b, we work our way through steps 46~52; wiring up the fuse panel, installing and wiring up the EZR Extruder and buttoning up the upper part of the printer. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 11 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work our way through steps 38~45; or basically- all the wiring to the Duet board… You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Let get this thing out of the box and put together! If you aren't familiar with Geetechs newest printer, check out the link below for specs and details: http://www.geeetech.com/large-volume-geeetech-a30-3d-printer-p-1025.html ****************************************************************************** If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Welcome to Part 10 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work our way through steps 35~37; installing the whip. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

With Mothers Day coming up, it seemed like a fitting time for a fun project that the whole family can be part of! Today I’ll show you how to make simple desk and wall signs using Fusion 360. These can be painted by the kids to make great gifts for Mom for Mothers Day! ********************************************************* All prints for this video were done on the Robo 3D R2 using experimental build plates of my own design (hence the bad adhesion and warping on some of these…). You can learn more about the Robo R2 here: https://bit.ly/2HQX1b6 For this video I was using AMOLEN Multicolor Gradient Rainbow PLA, available here from Amazon: https://amzn.to/2KfwrHd ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 8 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work our way through steps 31~34; installing the belts and tightening them up. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 8 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work our way through steps 24~30; starting off with installing the skates and finishing up with attaching the upper assembly. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 7 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we step outside the main manual over to the Carriage Assembly sub-manual. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en The Carriage Assembly Sub-manual is here: https://seemecnc.dozuki.com/Guide/Carriage+Assembly/59 ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 6 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work thru step 23 in the manual, crimping and connecting the wiring to the power supply. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en This was a long process, so the video came out a little longer than I had hopped. Apologies in advance for a few places where the down-cam lost track of the work or ended up with a great shot of the back of my head. ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Inspired by some pineapple planters I saw the Proto-Pasta team post over on Twitter, I had this idea to re-mix the pineapple into a replacement ceiling fan globe. This was really simple to do, and should be adaptable to almost any vase design that you can find. This was printed using Proto-Pasta Coffee HTPLA on my Prusa Mk3 printer. ********************************************************* Proto-Pasta is not currently making the Coffee Aromatic HTPLA, but you can still get is from Matter Hackers here: https://bit.ly/2HB73uj All Thingiverse model files shown in my videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 5 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work thru steps 20~22 in the manual, pulling the wires through the towers and attaching the towers to the base. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en This was a long process, so the video came out a little longer than I had hopped. Apologies in advance for a few places where the down-cam lost track of the work or ended up with a great shot of the back of my head. ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 4 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work thru steps 16~19 in the manual, pulling the wires through the towers and attaching the towers to the base. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en This was a long process, so the video came out a little longer than I had hopped. Apologies in advance for a few places where the down-cam lost track of the work or ended up with a great shot of the back of my head. ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 3 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this segment, we work thru steps 10~15 in the manual, building the upper motor mount assemblies. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en This was a long process, so the video came out a little longer than I had hopped. Apologies in advance for a few places where the down-cam lost track of the work or ended up with a great shot of the back of my head. ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

When the wife asked me to design and print her a fridge caddy, it seemed like a perfect Practical Printing project. This is a really simple practical project that can be adapted for your needs. I printed this on my Robo R2 using both MatterHackers BuildSeries PETG and Atomic Filament PETG. STL files for the project are available here: https://www.thingiverse.com/thing:2854520 ********************************************************* If you’d like to learn more about the Robo R2 or pick one up for yourself, they are available at MatterHackers Here: https://goo.gl/qGntJh You can find the MatterHackers Build Series PETG here: https://goo.gl/zDnKtM Also, the Atomic PETG is available here: https://goo.gl/AhZ9T1 ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 2 of the SeeMeCNC ROSTOCK MAX v3.2 Build Series. In this second segment, we work through step 9 in the manual. Start off by putting the feet on the base, mounting the power supply and finishing up with the base tower supports. You can follow along in the manual here: https://seemecnc.dozuki.com/Guide/Rostock+Max+v3.2+Build+Guide/88?lang=en My goal is to try to keep the videos in this series shorter around 5-10 mins each, but this came out pretty long. I hope you enjoy and if you are building a Rostock Max v3.2 yourself (or considering it), that his series helps supplement the manual for you. ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCK MAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out over at Matter Hackers here: Kit: https://goo.gl/P5PQCA Assembled: https://goo.gl/UNxKtW ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Welcome to Part 1 of the SeeMeCNC ROSTOCKMAX v3.2 Build Series. In this first part, we introduce the series, open the box, do a quick physical inspection of the parts and sort everything out. ********************************************************* If you’d like to learn more about the SeeMeCNC ROSTOCKMAX V3.2, here’s a link to the kit that I am building here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-diy-kit-black If you aren’t up for a kit, it is also available pre-built here: https://www.seemecnc.com/collections/3d-printers/products/rostockmax-v3-2-white-rtp-fully-assembled If the spiffy new Artemis is more your style, you can check that out here: Kit: https://www.seemecnc.com/collections/3d-printers/products/artemis-300 Assembled: https://www.seemecnc.com/collections/3d-printers/products/artemis-300-rtp-fully-assembled ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Live from MRRF2018!!!! Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Recently the wife and I went to Iceland for our wedding anniversary. This presented a great once-in-a-lifetime opportunity to collaborate with 3DP Iceland on one of his unique Topographic prints. Please be sure to check out the 3DP Iceland to see how this model was brought to life! https://youtu.be/WplBLZ8cZj0 ********************************************************* These were printed on the Robo R2 and the Prusa MK3. The painted model shown was done on the Robo R2 printer, available at MatterHackers: https://goo.gl/sS1Vz9 I used both the Repkord V-LINE Red PLA filament: http://amzn.to/2plgd6h And the MatterHackers Build Series White PLA: https://goo.gl/PyeMrw ********************************************************* If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Here’s a real simple way to make custom light switch plates/covers for around your house using Fusion 360! These were printed on the Prusa MK3. The High Five plates were done in ProtoPasta HighFive Blue: http://amzn.to/2ETmxba The Sea Turtle was done in Fillamentum Vertigo Galaxy: http://amzn.to/2ETI0AD The wonderful .svg files used on this are available at: Highfive by Yannick: https://www.flaticon.com/free-icon/high-five-stroke-gesture-symbol_55788 Turtle Icon by Freepik: https://www.flaticon.com/free-icon/turtle_502465 The models and Fusion360 templates for this video can be found in the thingiverse collection here: https://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Dave over at MatterHackers sent me a bottle of the Peopoly Neon Green resin and challenged me to do something RAD. So I figured, why not try to make the World's first (that I am aware of…) SLA Resin printed hairy lion. You can check out the Peopoly Neon Green resin at MatterHackers here: https://goo.gl/jg9dcF Don’t have a Moai? Check them out here: https://goo.gl/btR6ZP Models featured in this video, including the Hairy Lion by _primoz_ can be found in the thingiverse collection here: https://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Prusa just released the “final” firmware for the Mk3 this week. Updating the firmware on you Prusa Mk3 (and even the Mk2/Mk2s/Mk2MMU) is easy, but it can be intimidating for those that have never done it before. I’ll show you just how quick and easy it is! For the Latest Prusa Firmware, have a look here: https://www.prusa3d.com/drivers/ If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

We had a few non-responders on the giveaway, so we had to pick a few new winners, so…. Congratulations (again) to the winners of the The Practical Printing Super 3K Subscriber Thank You Giveaway!!!! New winners, you should be receiving emails from me shortly. Much Mahalo to all the subscribers and viewers that have helped me grow the channel, and to everyone that entered the giveaways! A very special thank you goes out to the sponsors of the giveaway! Show them some love and check out their links below!!! Matter Hackers Build Series Filament: https://goo.gl/MJUaxD Repkord V-line + 3 pack of Filament: http://amzn.to/2F5Aja4 3DKC Pre-pinned Pi Zero’s: http://www.3dkc.net/mk3pi/ PeopPoly 3D Printing Surface: http://amzn.to/2DwbKmu Fillamentum CPE HG100 from FilamentOne.com https://goo.gl/XePzuf If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Now that you have your new Prusa Mk3, lets look at 10 simple maintenance items to keep it running in prime condition! While this video specifically addresses the Mk3, most of these steps apply to maintaining ALL printers, however your printers manual will always supercede these tips. If you bought or built a printer that did not come with a manual, this will server as a good start for you. *** Items used in this video available on Amazon- Tri-flow lubricant for your rods and bearings: http://amzn.to/2E4Bx5z Canned Compressed Air for blowing out the filament sensor: http://amzn.to/2E0eRDm Pure Acetone for restoring the PEI sheet: http://amzn.to/2E4Dqzb All Thingiverse model files shown in our videos will be saved to this collection when possible: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Congratulations to the winners of the The Practical Printing Super 3K Subscriber Thank You Giveaway!!!! Winners, you should be receiving emails from me shortly. Much Mahalo to all the subscribers and viewers that have helped me grow the channel, and to everyone that entered the giveaways! A very special thank you goes out to the sponsors of the giveaway! Show them some love and check out their links below!!! Matter Hackers Build Series Filament: https://goo.gl/MJUaxD Repkord V-line + 3 pack of Filament: http://amzn.to/2F5Aja4 3DKC Pre-pinned Pi Zero’s: http://www.3dkc.net/mk3pi/ PeopPoly 3D Printing Surface: http://amzn.to/2DwbKmu Fillamentum CPE HG100 from FilamentOne.com https://goo.gl/XePzuf If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Lets take a first look at the new Fillamentum CPE HG100 filament. This is my “not a review” as I have not tried any other brands of CPE to compare it it. Special thanks go out to my supporters on Patreon as their generosity has enabled me to take a look at this filament. You can pick up a roll of the Fillamentum CPE HG100 from FilamentOne.com: https://goo.gl/XePzuf Or direct from Fillamentum: https://fillamentum.com All Thingiverse model files shown in our videos will be saved to this collection when possible: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

The Practical Printing Super 3K Subscriber Thank You Giveaway Update!!! More Prizes added and a few changes!!! MerchMinion reached out to me and suggested we add a couple of Tee shirts to the prize pool, so…. The winner of the (2) spools of MatterHackers Filament,AND the winner of the E3D Titan Aero provided by FilamentOne will both receive one of the new Practical Printing Tee shirts!!! But wait! There’s more!……… The 3DKC giveaway fo the Pre-pinned Raspberry Pi Zero-W for use with the Prusa Mk3 is not open internationally. Also, correcting the error on the prizes sponsored by FilamentOne- there ARE available internationally as well, not just in the US. Enter to win in the Practical Printing 3K sub super giveaway!!!! Thank you to all the subs and regular followers!!! Update: correction to the FilamentOne Giveaway, it IS available international, not just in the USA. Giveaways run through midnight on February 2nd, 2018 (GMT -8: Pacific US Time). Please be sure to note which are open to US only and which are International before entering! Practical Printing 3k Giveaway Part1 - Matter Hackers https://gleam.io/b8nSR/practical-printing-3k-giveaway-part1-matter-hackers Practical Printing 3k Giveaway Part2 - Repkord Filament https://gleam.io/B9PJB/practical-printing-3k-giveaway-part2-repkord-filament Practical Printing 3k Giveaway Part3 - 3DKC https://gleam.io/c8i26/practical-printing-3k-giveaway-part3-3dkc Practical Printing 3k Giveaway Part4 - Peopoly https://gleam.io/GVPrJ/practical-printing-3k-giveaway-part4-peopoly Practical Printing 3k Giveaway Part5 - FilamentOne https://gleam.io/YVTOE/practical-printing-3k-giveaway-part5-filamentone Check out the sponsors of this great giveaway! Matter Hackers Build Series Filament: https://goo.gl/MJUaxD Repkord V-line + 3 pack of Filament: http://amzn.to/2F5Aja4 3DKC Pre-pinned Pi Zero’s: http://www.3dkc.net/mk3pi/ PeopPoly 3D Printing Surface: http://amzn.to/2DwbKmu Fillamentum CPE HG100 from FilamentOne.com https://goo.gl/XePzuf If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Enter to win in the Practical Printing 3K sub super giveaway!!!! Thank you to all the subs and regular followers!!! Giveaways run through midnight on February 2nd, 2018 (GMT -8: Pacific US Time). Please be sure to note which are open to US only and which are International before entering! Practical Printing 3k Giveaway Part1 - Matter Hackers https://gleam.io/b8nSR/practical-printing-3k-giveaway-part1-matter-hackers Practical Printing 3k Giveaway Part2 - Repkord Filament https://gleam.io/B9PJB/practical-printing-3k-giveaway-part2-repkord-filament Practical Printing 3k Giveaway Part3 - 3DKC https://gleam.io/c8i26/practical-printing-3k-giveaway-part3-3dkc Practical Printing 3k Giveaway Part4 - Peopoly https://gleam.io/GVPrJ/practical-printing-3k-giveaway-part4-peopoly Practical Printing 3k Giveaway Part5 - FilamentOne https://gleam.io/YVTOE/practical-printing-3k-giveaway-part5-filamentone Check out the sponsors of this great giveaway! Matter Hackers Build Series Filament: https://goo.gl/MJUaxD Repkord V-line + 3 pack of Filament: http://amzn.to/2F5Aja4 3DKC Pre-pinned Pi Zero’s: http://www.3dkc.net/mk3pi/ PeopPoly 3D Printing Surface: http://amzn.to/2DwbKmu Fillamentum CPE HG100 from FilamentOne.com https://goo.gl/XePzuf If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Joe Mike over at 3DKC sent me one of his pre-pinnned Raspberry Pi Zero-w kits to install and test out on my Prusa Mk3 printer. The install was easy and I love the Octopi Interface! Did you know that Prusa Slic3r and Cura can both save gCode directly to a Octopi??? No more shuffling SD cards or tethering your computer! To get your own pre-pinned Pi zero, check out: http://www.3dkc.net/mk3pi/ ***** Use code PRACTICAL5 to save $5 off the complete kit! ***** The modified case and other printed components used in this video are available here: https://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Another practical print for you! I've improved the original carry handle I designed for the Prusa Mk3 to also include a drop-in spool holder! While the frame is solid, it’s not the easiest thing to hold, so I improved the design of my existing carry handle so that the same pieces can be used to spool out your filament as well. Now less items to carry. It should work on both the MK2 and the MK3 frames, and uses 0.75” PVC Pipe for the handle. You can download the .stl for the handle here: ...... https://www.thingiverse.com/thing:2763091 If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

MatterHackers has re-branded their standard filaments as the new Build Series, lowering prices putting it right at the price point to make it your every day go-to filament. I got a chance to take an early look at this before the launch, so here’s a first look at it. The new, more affordable build series filament is available here: https://www.matterhackers.com/store/c/mh-build-series?aff=7359 If you like the channel, please be sure to subscribe and leave a thumbs up! If keep a running list of all the cool things I find over at Amazon on my affiliate store. Check it out for some interesting 3D Printing treasures! https://www.amazon.com/shop/crussty You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/

Happy New Year!!!! Time for the first Practical Project of 2018! I’m going to be traveling soon for work and wanted to take the Prusa Mk3 with me. While the frame is solid, it’s not the easiest thing to hold, so I designed this simple carry handle. It should work on both the MK2 and the MK3 frames, and uses 0.75” PVC Pipe for the handle. You can download the .stl for the handle here: https://www.thingiverse.com/thing:2742360 If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Additional Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I received this package from Marteinn, also know as 3DP Iceland, just before Christmas and just had a chance to open it up on Camera. Inside is a beautiful model of the Tugnafellsjökull and the surrounding areas of Iceland, as well as some other goodies! Marteinn detailed his printing and painting of the model in his Landscape Vol8 Video. I totally recommend checking it out! https://youtu.be/NePYFvG9AR0 Thank you again for the package Marteinn!!! If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Working with some hardware for the day job, so I thought I would let if bead over to the channel a bit and give you guys a peak as some of what goes on in my world. The streaming device we are playing with today is made by Extron and is designed for classrooms and corporate education environments. https://www.extron.com/product/product.aspx?id=smp351 The cameras in use are from PTZ Optics and are fairly versitle. They also have an NDI version which is something I hope to work with in the future: https://ptzoptics.com/ndi/ If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I just pulled Ozzy out of moth balls. Lets asses and see what he needs to get him back up and running. ************************************ On the stream, we were talking about the parts the Triangle Lab sent me to play with, You can check them out here: https://www.trianglelab.org If you wanted to pick any of their parts up, AFAIK, they are only available via AliExpress. Be sure to hit their store, not other vendors selling re-branded ones. You can find them here (not an affiliate link): https://trianglelab.aliexpress.com/store/1654223 ************************************ If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I was asked by PolyMaker to review a roll of their new PolyLite Filament available only on Amazon.com. I was sent a roll of the black, but it is also available in several other colors and in both PLA and ABS. Check out my thoughts on it! You can pick up a roll of the Polylite PLA or ABS on amazon at : http://amzn.to/2j2h6Oh Note: this may be for US customers only. As of this review, it was not yet available internationally. ************************************* Please note that all links above are Affiliate Links. They help the channel without costing you anything extra if you use them, but please don't feel obligated to. ************************************** If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d ************************************** You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Special thanks to FilamentOne.com for sponsoring this episode! It's not too late to hit up their 40% sale running through CyberMonday https://www.filamentone.com/blogs/filamentone-news/black-friday-super-sale As I review and test several printers, I wanted an easy way to move an Octopi unit and camera around so that I could control them, monitor them remotely and record time lapse video of prints. All of my "fixed" printers have OctoPi and webcams attached, so why not??? Enter the Porta-PiTee! An all in one, self-contained unit that can mount to a mic boom or tripod and be positioned anywhere it is needed. Files to build the PortaPi will be uploaded and available to user within a few days of video release. This project was sponsored by the kind generosity of FilamentOne.com. -- You can check out the Noble Blue filament used here: https://www.filamentone.com/products/pla-extrafill-nobble-blue -- If you are looking for other great holiday deals, why not check out Gear Best while the Black Friday specials are still running? https://goo.gl/V8jtFR ************************************** If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d ************************************** You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi ************************************** Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 ************************************** I am now online at www.practical-printing.com Find me on Twitter @crussty ************************************** Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Check out the TipEye 3D pen on amazon: http://amzn.to/2jXhzo5 I was asked to review the TipEye 3D printing pen and share my experiences with you. Let me know what you guys think! -- You can also snag a great deal on filament assortment to go with it here! http://amzn.to/2A8DZZL -- If you are looking for other great holiday deals, why not check out Gear Best while the Black Friday specials are still running? https://goo.gl/V8jtFR Be sure to check out ChaosCoreTech and MakeAnything to see what they are doing with 3D printing pens!!! -- ChaosCoreTech https://youtu.be/z37RefPO5yY -- Make Anything https://www.youtube.com/playlist?list=PLgj62TJvVFSwdQKrbjMIb4q6QFsiaZD97 ************************************* Please note that all links above are Affiliate Links. They help the channel without costing you anything extra if you use them, but please don't feel obligated to. ************************************** If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d ************************************** You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi ************************************** Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 ************************************** I am now online at www.practical-printing.com Find me on Twitter @crussty ************************************** Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

***** Check out the Gear Best Black Friday Ad Here! Different deals every day through 12/4!!! https://goo.gl/V8jtFR ***** Also swing by the Matter Hackers Black Friday specials https://goo.gl/RJkThs ***** And sent forget to check out the the FilamentOne Black Friday deals active now! https://goo.gl/6EqiJH I thought with Black Friday and the holiday shopping season coming up, I would take the time to share with you what's on My Makers Christmas List. ~~~ Mele Kalikimaka !!! ~~~ ************************************* I will update this and the list below as I find deals or coupon codes on things that are going on my Christmas list! ************ Gear Best Links: ********** Get the Anycubic Kossel here: https://goo.gl/aPXR3M Get the Creality3D CR - 8 (with Laser) here: https://goo.gl/JCNyCB Get the Ender2 here: https://goo.gl/tCfCYQ ***** Get a 2-axis Brushless Handheld Gimbal here: https://goo.gl/thkfJK ************ Amazon Links: ********** Pick up an Anycubic Ultrabase w/ Heatbed, for i3 220x220mm here: http://amzn.to/2mTZSXH Pick up an Anycubic Anycubic Ultrabase Tempered Glass Plate 214x214mm here: http://amzn.to/2A0bn4w Pick up an Anycubic Noctua 40x40mm silent fans here: http://amzn.to/2zeDXMw Pick up an Anycubic Magigoo Pen here: http://amzn.to/2hW3oiA Pick up an Anycubic Samson Stage XPD1 USB Wireless Presentation System here: http://amzn.to/2hOqunj Pick up an Anycubic Bondhus Metric Hex Balldrivers here: http://amzn.to/2hU73gI ************ Matter Hackers Links: ********** Catch a sweet deal on an X-Carve 1000 here: https://goo.gl/mNcGbk ************ FilamentOne Links: ********** Try the Vertigo Grey PLA here: https://goo.gl/1M5PAq Try the Noble Blue PLA here: https://goo.gl/NgP3aU Check out the CF-15 Carbon Fibre Nylon here: https://goo.gl/3SJqn6 ************************************* Please note that All Links above are Affiliate Links. They help the channel if you use them, but please don't feel obligated to. ************************************** If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d ************************************** You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi ************************************** Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 ************************************** I am now online at www.practical-printing.com Find me on Twitter @crussty ************************************** Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

The Zonestar Z5MR2 Mixed Color Printer is available from Gear Best Here if you would like to pick one up: https://goo.gl/KBq5hM I put together the Zonestar Z5MR2 Mixed Color Printer a few weeks ago on a live stream and finally have it dialed in enough to provide a review on the unit. This printer was provided to me by Gear Best free of charge to work with and provide my honest opinion on. If you have some experience with a single extruder printer and want to experiment with a dual color printer, for the price point, this may be a good option for you to look at. The Zonestar Z5MR2 Mixed Color Printer is available from Gear Best Here if you would like to pick one up: https://goo.gl/KBq5hM Note the links above are affiliate links. If you would like a direct link, please use this: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_834244.html?wid=21 You can find Zonestar on the web at: www.zonestar3d.com The filament used in this video is: Rapunzel Silver, Vertigo Grey, Vertigo Galaxy and Nobel Blue PLA Filamentum filament from: https://www.filamentone.com/collections/pla Repkord Blue PLA from: http://amzn.to/2iGCHve eSUN Natural PLA from: http://amzn.to/2jetdag If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support the channel by using the affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Matter hackers is running their annual Blue Friday sale and if you have been thinking about picking up a Moai, NOW is the best time! https://goo.gl/RY2raK Printer Deals: All 3D printers and 3D Carvers/Mills will be at least 10% off, excluding Ultimaker 3D printers. THIS INCLUDES THE MOAI kit and pre-assembled!!! https://goo.gl/VStJDb The following printers are discounted at an even higher rate!!! - LulzBot Taz6 and Mini - 20% off https://goo.gl/6W2k8s - BCN3D Sigmas R17 - 15% off https://goo.gl/F2LvMQ - All Raise3D N2 flavors - 12% off https://goo.gl/a12YMu - The infamous Pulse printer - 15% off!!!!!! https://goo.gl/A51seo Filament Deals: All filament (yes, ALL filament - every brand/type they carry) will be 15% off!!!!!!. https://goo.gl/URMYYa Accessories: All accessories (yes, ALL accessories and upgrades - every brand/type they carry) will be at least 10% off. https://goo.gl/rMBbYy The following accessories are discounted at an even higher rate: - MatterControl T7X - 15% off!!! https://goo.gl/hmHn4b - Olsson Ruby Nozzles - 15% off!!! That means they are just $76.50!!! https://goo.gl/RrNvem And of course with Matter Hackers, shipping is always free!!!! Just be sure to hit that Blue Friday discount button on checkout, and if prompted use code “BLUFRI” Note the links above are affiliate links. If you would like a direct link, please use this: https://www.matterhackers.com/blue-friday If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Today I will be unboxing and assembling the Zonestar Z5MR2 Mixed Color Printing DIY 3D Printer Kit from Gear Best. You can check ou the printer at Gear Best here: https://goo.gl/NLsAEo This kit was provided to me as no cost from Gear Best to assemble and review, however I have not been compenstated in any other way. The opinions I share in this video are mine. If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I got a special package in the mail from Isabelle Moser, so I thought it deserved a video all of it’s own so I could say thank you!!! If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is now on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Now that I have the Peopoly Moai up and running, I needed a way to cure the prints. So I built this very simple, down and dirty UV LED Curing “Bucket.” It’s not pretty, but it is very simple and easy to make- and most importantly, it is CHEAP!!l These are the UV 12V Waterproof LED’s that I used for this project. They are in the right UV spectrum to cure prints with most resin’s that can be used on the Moai and many other SLA printers. http://amzn.to/2gZ0WnE If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/mWTCiE Moai direct from Peopoly https://peopoly.net/collections/frontpage Links referenced in the video: Tri-Flow Lubricant Drip Bottle http://amzn.to/2yHXSpp Peopoly Forum https://forum.peopoly.net For printable tools and upgrades/assecories for the Peopoly Moai, see the Thingiverse group here: https://www.thingiverse.com/groups/peopoly-moai/things If you like the channel, please be sure to subscribe and leave a thumbs up! Practical Printing is not on Patreon! If you'd like to support the channel, please check out: https://www.patreon.com/pp3d You can also support us by using our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Peopoly Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! In the series finale, we cover post processing your first print, maintenance of the printer, clean up and some basic resin handling. As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/mWTCiE Moai direct from Peopoly https://peopoly.net/collections/frontpage Links referenced in the video: Tri-Flow Lubricant Drip Bottle http://amzn.to/2yHXSpp Peopoly Forum https://forum.peopoly.net For printable tools and upgrades/assecories for the Peopoly Moai, see the Thingiverse group here: https://www.thingiverse.com/groups/peopoly-moai/things If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Peopoly Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! In this part of the series, we do our first test print- the PeoPoly Ring. As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/mWTCiE Moai direct from Peopoly https://peopoly.net/collections/frontpage For printable tools and upgrades/assecories for the Peopoly Moai, see the Thingiverse group here: https://www.thingiverse.com/groups/peopoly-moai/things If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/JZLovC Gear Best: https://goo.gl/ni2ZCi Channel Intro and time lapse music by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

This is NOT a review, it's an ANTI-REVIEW. We had a great community effort on the builds of the TronXY X8 printer and I think it's time to close chapter one on this printer. Unfortunately the quality control just want there. I really think this is very representative of what you get in a really cheap kit. For more details on the how bad the QC is on this kit, please see the full build of the community stream. If you are really adventurous and want to see how bad this kit is for yourself, my affiliate links for the best pricing are below. Gear Best did provide this kit to me free of charge to build and review, however each of the builders in the Community build bought their own kits. ***Updated Affiliate link to TronXY X8 printer on Gear Best for this project: US Plug: https://goo.gl/ge1Lpd EU Plug” https://goo.gl/DjEnEG If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Channel Intro by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Peopoly Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! In this part of the series, I walk you through checking the calibration of the Galvo and leveling the build plate to the VAT. As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/RndF1Y Moai direct from Peopoly https://peopoly.net/collections/frontpage For printable tools and upgrades/assecories for the Peopoly Moai, see the Thingiverse group here: https://www.thingiverse.com/groups/peopoly-moai/things If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Channel Intro by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

***Updated Affiliate link to TronXY X8 printer on Gear Best for this project: US Plug: https://goo.gl/ge1Lpd EU Plug” https://goo.gl/DjEnEG Join Pete, Randy, Jeffery, Eddie and Isabelle and myself for the first ever community printer build! We will also have different surprise guests from the 3D printing community popping by the stream throughout the day. Enjoy the fun with us and learn along with the builders! Today we will be building the TronXY X8 i3 style printer available at Gear Best as a comminity build. The expericed builders will be coaching along those who have less experience and we will all come out of this thing together! The affiliate links are above for both the US and the UK plug versions of the printer. If you would like to participate in the event, please DM me on twitter, leave a comment here, or send me and email. Please be sure to include your name, and your estimated receiving date of the printer ***Updated Affiliate link to TronXY X8 printer on Gear Best for this project: US Plug: https://goo.gl/ge1Lpd EU Plug” https://goo.gl/DjEnEG If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Channel Intro by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Thought I would take a minute to introduce the builders for the community TronXY X8 build. Please give these folks a big shoutout on social media. The build is scheduled to 10/14 at 9am PST / 4pm GMT / 10/15 @ 3am AEDT. Come join us for the fun on this first one of a kind event! Note from the announcement video: Rather than just watching me build a printer to review for you, I thought I would extend the invitation to all the viewers to purchase the kit at the discounted price that Gear Best provided and build it along with me. We would do this as a live stream and support each other in the chat so that all of the builders could help each other out. This is a great opportunity for beginners to have experienced builders help them out, and a great opportunity for experienced builders to get a chance to help out the noob’s. Don’t need another printer? At this price, it would be a fun kit to assemble and donate to a local school,, youth group, maker space or other community near you! The affiliate links are above for both the US and the UK plug versions of the printer. If you would like to participate in the event, please DM me on twitter, leave a comment here, or send me and email. Please be sure to include your name, and your estimated receiving date of the printer ***Updated Affiliate link to TronXY X8 printer on Gear Best for this project: US Plug: https://goo.gl/ge1Lpd EU Plug” https://goo.gl/DjEnEG If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Channel Intro by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Peopoly Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! Please excuse any glitches in the video- I had accidently streamed the filming of this rather than hitting record, so had to assemble from As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/RndF1Y Moai direct from Peopoly https://peopoly.net/collections/frontpage For printable tools and upgrades/assecories for the Peopoly Moai, see the Thingiverse group here: https://www.thingiverse.com/groups/peopoly-moai/things If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Channel Intro by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Peopoly Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! **** I did want to point out that I made a mistake when installing the wiring in this segment. The Power switch should not have been installed yet- it will go on after the front cover gets installed later. **** As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/RndF1Y Moai direct from Peopoly https://peopoly.net/collections/frontpage If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Channel Intro by Joseph Cervantes. You can find more of his great music here: https://soundcloud.com/joseph-george-cervantes Instagram:airbum92 Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Thank you to all the subscribers, viewers , content creators, modelers and everyone else in the community that has gotten me to this first major Youtube hurdle! Congratulation to the winners of the (1) roll of MatterHackers Pro series PLA or ABS filament and the (3) rolls of Fillamentum PLA to the second luck winner provided by FillamentOne! The winners will be getting an email from me and will have 48 hours to respond and claim their prizes. Congratulations again and a much mahalo to EVERYONE of you for your support!!! Be sure to give a special shout out to both MatterHackers and FilamentOne for making this possible! If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: http://www.matterhackers.com/?rcode=A... Amazon: http://amzn.to/2gQC6Wg Gear Best: https://www.gearbest.com/3d-printers-... Royalty Free Music from: http://www.bensound.com/royalty-free-... I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/RndF1Y Moai direct from Peopoly https://peopoly.net/collections/frontpage If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! As we continue the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/RndF1Y Moai direct from Peopoly https://peopoly.net/collections/frontpage If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

ordered the Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! As we begin the assembly, you can follow allow in the assembly guide located here: https://goo.gl/S1ttN1 And the hardware assembly guide here:https://goo.gl/jPy9Hd If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) https://goo.gl/RndF1Y Moai direct from Peopoly https://peopoly.net/collections/frontpage If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg MatterHackers: https://goo.gl/4nSX9r Gear Best: https://goo.gl/ni2ZCi Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) http://www.matterhackers.com/s/store?q=moai&rcode=ALOHA Moai direct from Peopoly https://peopoly.net/collections/frontpage Spanner Hands in the UK: http://www.spannerhands.co.uk/moai---pre-order-only-4705-p.asp If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: http://www.matterhackers.com/?rcode=ALOHA Amazon: http://amzn.to/2gQC6Wg Gear Best: https://www.gearbest.com/3d-printers-c_11340/?lkid=11204123 Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I ordered the Moai Laser SLA kit a few months back when it was on pre-order and it’s finally here!!!! I thought I would take the time to document the build in a series of bite size videos that would help make it easier to make it through the build and follow along with the Peopoly documentation. If you are not familiar with the Moai, you can read up on them at https://peopoly.net Be sure to follow along with the entire series of video as I take you from Pre-check to first launch! If you would like to purchase your own Moai, they are available at: Moai at MatterHackers (free shipping in the US): (affiliate link) http://www.matterhackers.com/s/store?q=moai&rcode=ALOHA Moai direct from Peopoly https://peopoly.net/collections/frontpage If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: http://www.matterhackers.com/?rcode=ALOHA Amazon: http://amzn.to/2gQC6Wg Gear Best: https://www.gearbest.com/3d-printers-c_11340/?lkid=11204123 Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Thank you to all the subscribers, viewers , content creators, modelers and everyone else in the community that has gotten me to this first major Youtube hurdle! As a special thanks to all my subscribers, I am given out (1) roll of MatterHackers Pro series PLA or ABS filament internationally. Additionally I am giving out (3) rolls of Fillamentum PLA to a second luck winner somewhere within the USA provided by FillamentOne! Be sure to give a special shout out to both MatterHackers and FilamentOne for making this possible! Both contests end at 23:59pm pacific time on October 02, 2017. International MatterHackers Drawing: https://gleam.io/ktaNn/500-subscribers-matter-hackers-giveaway US only FilamentOne drawing: https://gleam.io/DGIXa/500-subscribers-filamentone-giveaway If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: MatterHackers: http://www.matterhackers.com/?rcode=ALOHA Amazon: http://amzn.to/2gQC6Wg Gear Best: https://www.gearbest.com/3d-printers-c_11340/?lkid=11204123 Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Affiliate link to TronXY X8 printer on Gear Best for this project, now priced lower at USD $159.99: US Plug: https://goo.gl/ge1Lpd EU Plug” https://goo.gl/DjEnEG In preparation for the Build-A-Long of the TonrXY X8, I'm going to do a live un-boxing and inventory of parts. Rather than just watching me build a printer to review for you, I thought I would extend the invitation to all the viewers to purchase the kit at the discounted price that Gear Best provided and build it along with me. We would do this as a live stream and support each other in the chat so that all of the builders could help each other out. This is a great opportunity for beginners to have experienced builders help them out, and a great opportunity for experienced builders to get a chance to help out the noob’s. Don’t need another printer? At this price, it would be a fun kit to assemble and donate to a local school,, youth group, maker space or other community near you! The affiliate links are above for both the US and the UK plug versions of the printer. If you would like to participate in the event, please DM me on twitter, leave a comment here, or send me and email. Please be sure to include your name, and your estimated receiving date of the printer If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg Gear Best: https://www.gearbest.com/3d-printers-c_11340/?lkid=11204123 Royalty Free Music from: http://www.bensound.com/royalty-free-music I am now online at www.practical-printing.com Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Rather than just watching me build a printer to review for you, I thought I would extend the invitation to all the viewers to purchase the kit at the discounted price that Gear Best provided and build it along with me. We would do this as a live stream and support each other in the chat so that all of the builders could help each other out. This is a great opportunity for beginners to have experienced builders help them out, and a great opportunity for experienced builders to get a chance to help out the noob’s. Don’t need another printer? At this price, it would be a fun kit to assemble and donate to a local school,, youth group, maker space or other community near you! The affiliate links are below for both the US and the UK plug versions of the printer. If you would like to participate in the even, please DM me on twitter, leave a comment here, or send me and email. Please be sure to include your name, and your estimated receiving date of the printer Affiliate link to TronXY X8 printer on Gear Best, priced at $165.99 for this project: US Plug: https://goo.gl/ge1Lpd EU Plug” https://goo.gl/DjEnEG If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Amazon: http://amzn.to/2gQC6Wg Gear Best: https://www.gearbest.com/3d-printers-c_11340/?lkid=11204123 Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

It’s time for my final review of the Feetz 3D Printed shoes. Is it the right choice for you? Only you can decide! If you are interested in getting your own pair of Feetz, you can pick up a pair of standard sized or custom shoes here: https://www.feetz.com Also be sure to check out Joel’s (3D Printing Nerd) review here: https://youtu.be/sTxltq7fF-o And Travis’s (A PyroDesign) review here: https://youtu.be/jb8UE3JQixI If you like the channel, please be sure to subscribe and leave a thumbs up! If you’d like to help support the channel, please try our affiliate links below. These cost you nothing extra, but it does help me fund the supplies I need to keep the channel going: Gear Best: https://www.gearbest.com/3d-printers-c_11340/?lkid=11204123 Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Also be sure to follow Practical3D on FaceBook for all the latest updates: https://www.facebook.com/Practical3D/ Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

When Jeffrey over at the Print 3D Channel told me he needed a spool holder for the Tevo Tarantula that he was building, I knew there was only one thing I could do: Design something that was practical and simple, that used little more than the printed pieces and would put his gMax to the test! In Part 1 we go through the concept and design of the spool holders as well as a test print. Be sure to tune in tomorrow for the exciting conclusion over on the Print 3D Channel! https://youtu.be/8uTOPeo37Hg The spool holder model can be downloaded at Repable’s if you would like to try your own! All that's needed is a couple of feet of 3/4 inch PVC pipe! https://repables.com/r/862/ Special thanks to Dustin (A.K.A the JAT.MN for helping with the test prints for sizing). https://www.youtube.com/channel/UC6JyY2ns5FOFotH88RGqNEw If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

It’s time for the final review of the BuildTak FlexPlate system. Is it the right choice for you? Only you can decide! The Built Flex Plate system was evaluated on the Monoprice Maker Select AKA the Wanhao Duplicator I3, etc, however my findings should be relative to any printer and size of the system. If you are interested in the Flex Plate system it can be purchased from Mater Hackers here: https://www.matterhackers.com/store/c/BuildTakFlexPlate Or Direct from BuildTak here: https://www.buildtak.com/product/buildtak-flexplate-system/ Or your vendor of choice… If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout! The BuildTak FlexPlate system was provided to Practical Printing to review at a discounted rate, but was not provided free of charge. Nor were we compensated in any way for our opinions about this product.

Join us for the Friday Night 3DP Community Stream! Tonight we will address the topic of social responsibilities of those visible to the public. Links to those who participated tonight: Practical Printing Chris Russell YouTube: http://youtube.com/practicalprinting Twitter: @crussty Facebook: https://www.facebook.com/Practical3D/ 3DP Iceland Marteinn Sigurðsson YouTube: https://www.youtube.com/channel/UC0mCv6KnukPr71l8RYEvDFg Twitter: @3DPIceland How I Do It Matthew Flinchbaugh YouTube: https://www.youtube.com/HowIDoIt Instagram: https://www.instagram.com/matthewflinchbaugh Twitter: @countrycowboy Patreon: https://www.patreon.com/HowIDoIt Thingiverse: https://www.thingiverse.com/Matthewflinchbaugh Zidim Richard Murray YouTube: https://www.youtube.com/channel/UCMJcHWWdHJNmw6-jlzqRBDg Fun King 3D YouTube: www.youtube.com/funking3d TGAW Vicky YouTube: www.youtube.com/TGAW3D Neoprotney Mike YouTube: www.youtube.com/Neoportnoy3dprinting Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Just a quick recap on what’s been happening at Practical Printing and some updates of some things that are coming down the pipe. Help support the channel by using out Amazon Affiliate link! It costs you nothing extra and helps feed the hungry printers! http://amzn.to/2uOYQML If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Just like the plastic we run through our printers, the heat bed and hot end are impacted by thermal changes. You may be surprised at how much deviation your get when leveling the bed at ambient temperature vs doing it at printing temps. We explore this briefly today. Makers Muse on setting the nozzle height and bed leveling: https://youtu.be/_BuuGswqWWE I am now an Amazon affiliate! Please consider using the link below for all you Amazon shopping. It will kick a little back to help sustain the channel and allow me to keep bringing you content, and it doesn't cost you anything more to use! http://amzn.to/2urwPx8 All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

This morning I will try to get through updating the Y Carriage Plate with the RepRap Champion solid aluminum plate. I will also be replacing the Y bearings with IGUS Drylin bearings while I'm in there. Time permitting I will also be installing the RepRap Champion Turnbuckle style Z brace kit. Links to each below. Aluminum Carriage Plate for Prusa i3, Wanhao Duplicator and Monoprice Maker Select: https://reprapchampion.com/products/aluminum-carriage-plate-v3-for-prusa-i3-wanhao-duplicator-and-monoprice-maker-select?variant=34151170310 Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2 and V2.1: https://reprapchampion.com/products/z-brace-frame-support-kit-for-wanhao-duplicator-i3-and-monoprice-maker-select-v1-v2-and-v2-1?variant=43337153877 Z-Brace Frame Support Kit for Wanhao Duplicator i3 and Monoprice Maker Select PLUS 3D Printer: https://reprapchampion.com/products/z-brace-frame-support-kit-for-wanhao-duplicator-i3-and-monoprice-maker-select-plus-3d-printer?variant=45802053269 IGUS Drylin Bearings: https://www.folgertech.com/products/igus-rj4jp-01-08-8mm-linear-bearing-to-replace-lm8uu I am now an Amazon affiliate! Please consider using the link below for all you Amazon shopping. It will kick a little back to help sustain the channel and allow me to keep bringing you content, and it doesn't cost you anything more to use! http://amzn.to/2urwPx8

My dentist turned my onto a great tool for clearing jams in the tip of your nozzle. Its called an Endodontic (or Dental) file and its works great! Worth noting that using any kind of mechanical device (dental file, drill bit, etc.) does risk the chance of scratching you nozzle, so it should only be used when non-invasive methods of clearing the jam (such as Atomic Pulls) don't work. Your best resource for these is you own family dentist, but you can also find them online at all of the usual haunts. For example, here is a set from Amazon: https://www.amazon.com/15-40-Medical-Stainless-Reamers-endodontic/dp/B019SM91ZA/ref=sr_1_1?ie=UTF8&qid=1499820810&sr=8-1&keywords=dental+files If you are in the HB area, be sure to pay a visit to Adams Ave. Dental! They are hand down the best dentists my family has ever had! http://adamsavedental.com If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

This time on Practical Printing we are going to unbox and install the BuildTak FlexPlate System on Sharon, my Monoprice Maker Select (Wandhao Di3). Apologies for the few camera and lighting glitches and the explosions in the background. Filmed this over the course of the 4th of July, and every time fireworks went off, the lights flickered... Though left out for the video by oversight, the FlexPlate System was provided to me by BuildTak at a discounted price for review on this channel. If you are interested in picking up the FlexPlate system if can be purchased from MatterHackers at: https://www.matterhackers.com/store/c/BuildTakFlexPlate or direct from BuildTak at: https://www.buildtak.com/product/buildtak-flexplate-system/ I am now an Amazon affiliate! Please consider using the link below for all you Amazon shopping. It will kick a little back to help sustain the channel and allow me to keep bringing you content, and it doesn't cost you anything more to use! http://amzn.to/2urwPx8 All other Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Filamentone.com sent me a roll off the beautiful Filamentum Vertigo Grey PLA filament. I’ve gotta say, I was impressed! In the US, you can find the Vertigo Grey at Filamentone.com: https://www.filamentone.com/collections/pla-extrafill/products/pla-extrafill-vertigo-grey You can find the MLP Unicorn and many other beautiful designs from 3DPrintedAspie here: https://www.thingiverse.com/3DPrintedAspie/designs All other Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I was contacted by the Amazonian Filament Company to give their new Morphing Crystal filament a try. Think this stuff is going to be a hit! It sure worked great for Wonder Woman's jet! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I needed a way to suspend a camera from the ceiling of my garage yesterday for a live stream, so I came of with this down and dirty Practical Print. This printed quickly on my SeeMeCNC H2 printer and allowed me to hang a camera from the existing exposed 2x4 rafters in my garage. This was a very quick project you can do at home using just a couple dollars worth of hardware available at most hardware stores. Worth noting, that this is NOT a HEAVY DUTY camera mount. While this is great for a light weight Go Pro or Web camera, I would not recommend using this to hang your $1000 camcorder or DSLR from… All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Cohesion3D provided me with one of their Di3 platform upgrade kits. I will be doing this live today to show the process from start to finish. This kit is designed to work with the Wanaho Di3, the Monoprice Maker Select, and any other variation/branding of this printer. This is a sponsored stream, so I will ask everyone to keep their questions for me relative to the upgrade process. If you are interested in more information, or purchasing this upgrade kit, it is available at: http://cohesion3d.com/cohesion3d-mini-i3-printer-upgrade-bundle/ Filament for this stream was Filamentum Vertigo Grey, provided by Filamenone in the US. https://www.filamentone.com/

Been a slow few weeks being sick, but thought I’d post an update on the progress on the rebuild of Ozzy, my Gmax 1.0 that’s been modded to hades and back. The conversion pieces for the X/Y axis are available at the experimental files section of the gCreate forum: http://forum.gcreate.com/downloads.php?cat=17&sid=62aff328a13ac02f349d558fc6721c59 My extruder design is not yet public, however my Y axis tensioner and some other mods for gMax’s are available on github at https://github.com/cncpadawan/jank3d/tree/master/gMax%20Related/gMax%201.5/Upgrades/All%20Other All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

I thought it would be a great experiment to see if I could use the MatterHackers Pro Series Nylon to print a chew toy for my dog Kona. This was all printed on my “hacked” SeeMeCNC H2 Hacker series delta using a PeopPoly.net build surface. Links to all below. MatterHackers Pro Series Nylon: 1.75mm https://www.matterhackers.com/store/3d-printer-filament?t=1.75mm%20PRO%20Series%20Nylon MatterHackers Pro Series Nylon: 3.0mm https://www.matterhackers.com/store/3d-printer-filament?t=3.00mm%20PRO%20Series%20Nylon Peopoly FDM Printing Surface Single Pack https://peopoly.net/products/peopoly-fdm-printing-surface Double Pack https://peopoly.net/products/peopoly-fdm-printing-surface-double-pack SeeMeCNC H2 Delta Kit: https://www.seemecnc.com/collections/3d-printers/products/h2-delta-diy-3d-printer-kit All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

So last week I was bit by the famous power connector burnout on the Di3 style machines. Monoprice was great about an RMA. So let's box this thing together, get it assembled and check and see if the board and connectors have been updated since my original.

In this 2 Part series, I will be attempting to make my own DIY Hot-end Heater block socks similar to the silicone socks available from E3D and other vendors. While I am focusing on making a sock here for a SeeMeCNC HE280 hot end, there are models available online for mold to fit the E3D V6 and many other printers. In this episode (Part 2) I remove the cured silicone from the mold, fit it on the hot end and report the results. Pass/Fail? You decide and let me know in the comments below! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Had a memory card failure, bit I’m pleased to present you with this quick montage of the footage I was able to salvage from #MFBA17. Audio isn’t the best, but if you have been watching ONO, be sure to listen in on the part from T3D and check them out online at http://myt3d.com! Too many great makers and venders showing at the faire to call them all out, but thanks to everyone that made this such an EPIC event! A special shoutout to SeeMeCNC, Matter Hackers, Peopoly and all my fellow YouTubers for making the event even better for me! If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

This episode was printed using Ozzy, a highly modified original gMax 1.0 on steroids. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

In this 2 Part series, I will be attempting to make my own DIY Hot-end Heater block socks similar to the silicone socks available from E3D and other vendors. While I am focusing on making a sock here for a SeeMeCNC HE280 hot end, there are models available online for mold to fit the E3D V6 and many other printers. In this episode (Part 1) I will be explaining the process, showing where to find the model, and showing how to pack the mold with silicone. While most online tutorials recommend using 2-part silicone, I used readily available low cost hi-temp RTV silicone from a local auto parts store. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel I am now an Amazon affiliate! Please consider using the link below for all you Amazon shopping. It will kick a little back to help sustain the channel and allow me to keep bringing you content, and it doesn't cost you anything more to use! http://amzn.to/2urwPx8 If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Ever wanted to add a heat bed to your @SeeMeCNC H2? Here's how! In this episode, I quickly walk you through upgrading the SeeMeCNC H2 Hacker Series kit with the Orion Heat bed. Links to most of the parts and files I used are below. You will still need to source appropriate wiring, connectors, etc. Files mentioned can be found at this link: http://repables.com/r/853/ SeeMeCNC Orion Heated Bed kit: https://www.seemecnc.com/products/orion-heated-bed xBox 360 203W Power Supply: https://www.amazon.com/Official-Microsoft-Power-Supply-Adapter/dp/B003WM1P5W/ref=sr_1_1?s=electronics&ie=UTF8&qid=1494013113&sr=1-1&keywords=xbox+360+power+203W Speakon Cable Connector: https://www.amazon.com/Foitech-Speakon-Compatible-Audio-Connector/dp/B00UTJE8H8/ref=pd_bxgy_23_img_2?_encoding=UTF8&pd_rd_i=B00UTJE8H8&psc=1&refRID=HGXYJXYA79JCYMKJZV08&refinements=p_85 Speakon Chasis Connector: https://www.amazon.com/Foitech-Female-Speakon-Connector-Color-2pcs/dp/B00UTJQYBG/ref=sr_1_12?rps=1&ie=UTF8&qid=1494012966&sr=8-12&keywords=speakon+connector&refinements=p_85%3A2470955011 Silicone Thermal pad to hold down the glass: https://www.amazon.com/gp/product/B01N9HGKR1/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 If you like the channel, please be sure to subscribe and leave a thumbs up. Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Congratulations to the winner of the roll of Atomic Filament PLA! I’d like to thank everyone who entered the contest and has been following the channels growth! A special thanks goes out to Matt at How I do It for running his giveaway in tandem with mine! And even bigger thanks goes out to Atomic Filament for making this giveaway possible! I can't say enough good things about their filament. It's priced just right, had awesome color and flows great! Be sure to visit Atomic Filament online: https://atomicfilament.com If you like the channel, please be sure to subscribe and leave a thumbs up! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

In this episode, I use Fusion 360 to model a simple little trash can that fits up to the side of Bruiser, my SeeMeCNC H2 Hacker Series delta with an added heat bed. I use Fusion 360 to generate the model, then use Slic3r to generate the trash can using spiral vase mode, and finally print it on Bruiser. If you are watching this on or before May 3rd, 2017, be sure to enter to our 100 subscriber giveaway. Practical Printing Giveaway: https://gleam.io/Wv5tR/practical-printing-100-subscriber-thank-you How I do It Giveaway: https://gleam.io/Oe8Sq/100-youtube-subscriber-giveaway If you like the channel, please be sure to subscribe and leave a thumbs up. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

Special Props to Jeffery Wright (Print 3D Channel- be sure to check out the #3DP365Project!), Curtis of Lucky 13 Vinyl and Paul of Sioux Designs for the great gifts they’ve sent my way!!! This week we look at a few places on the web to help you trouble shoot print quality and find information on different filaments. Links mentioned in the video: —Simplify3D print Quality Troubleshooting Guide: https://www.simplify3d.com/support/print-quality-troubleshooting/ —Matter Hackers How-To’s: http://www.matterhackers.com/topic/how-to — Rigid.ink Ultimate Guide to 3D Printing: https://rigid.ink/pages/filament-comparison-guide Enter to win my 100 subscriber thank you giveaways here before May 3rd 2017! Enter to Win My contest here: https://gleam.io/Wv5tR/practical-printing-100-subscriber-thank-you You can also enter to win the How I do It giveaway here: https://gleam.io/Oe8Sq/100-youtube-subscriber-giveaway If you like the channel, please be sure to subscribe and leave a thumbs up! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

As a special thank you to all of my subs, viewers and the 3D printing community as a whole who have helped grow this channel past its first 100 subscribers, I'd like to show my appreciation by giving away a roll of my current favorite filament. So the lucky winner will receiver a roll of Atomic PLA, made out here in California, USA! Enter to Win My contest here: https://gleam.io/Wv5tR/practical-printing-100-subscriber-thank-you Enter to Win How I do it's contest here: https://gleam.io/Oe8Sq/100-youtube-subscriber-giveaway If you like the channel, please be sure to subscribe and leave a thumbs up. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

This is just a quick first look at the upcoming B3 Innovations Pico Hybrid Hotend. This should be available on KickStarter very soon. I was lucky enough to receive a beta unit to put it through it's paces. The most impressive thing so far is how light it is! A full review will be forthcoming once I get it fitted to a printer. You can watch www.b3innovations.com for more info on release. If you like what we are doing here at Practical Printing, be sure to give us a thumbs up and hit that subscribe button! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty! Be sure to watch @F3DPCH on Twitter for updates and announcements on the Friday 3D Printing Community Live Hangout!

This week on Practical printing we follow up on the Nested 3D images technique I covered last time, and show you how to use Simplify3D to make 3D printed Stencils that can be used for spray painting, tracing or anything that you can come up with. I’ll show you how to generate the stl files in Simplify3D from a flat image and walk you through the settings needed for a successful print. I’ll also touch on how to handle “islands,” i.e. the inside of letters like D. The #3DPinkMafia logo from Heather over at A Pyro Design will make a special appearance to show how multiple stencils can be layered to achieve this/ If you try this technique and come up with some amazing prints, please be sure to tag me on twitter so I can see what you came up with! If you like what we are doing here at Practical Printing, please be sure to subscribe! Find me on Twitter @crussty Be sure to check out A Pyro Design and 3DPinkMafia's "Pink The Pink" series here: https://www.youtube.com/user/alfonsopyro The font I used to generate the ON AIR stencil and many others that are free for personal use can be found here: http://www.dafont.com/theme.php?cat=114 UPDATE: Dave At MatterHackers shared with me an article he published a few years back n how to do this using MatterControl. This is another great alternative for those that don't use S3D! https://www.matterhackers.com/articles/how-to-3d-print-a-custom-stencil

Last week, I was working with Travis from A Pyro Design to come up a new logo for the channel. I wanted something not just for the screen, but also something that could be 3D printed. While doing so I discovered this neat process of using the built in Image to 3D tool in Simplify 3d convert the image with different depth profiles to allow nesting the images together. This should also be usable for dual-extrusion for multi-color prints. Sorry about the mess here in the office behind me. Spring cleaning in progress! If you try this technique and come up with some amazing prints, please be sure to tag me on twitter so I can see what you came up with! If you like what we are doing here at Practical Printing, please be sure to subscribe! Find me on Twitter @crussty

Just a quick fun video with the print flying around to Dub Step. Really, Really helps to enable the heat bed in your slicer... This episode was destroyed using Bruiser, a SeeMeCNC H2 hacker series delta with a heat bed added (and unused). :( If you like the channel, please be sure to subscribe and leave a thumbs up. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

In this episode of Practical Printing we take a look at the “Yet ANOTHER Machine Vise” by TheGoofy. Be sure to give him so love on Thingiverse! This is a long, but fun print that is very handy for little projects around the house. This was printed on Ozzy, a heavily modified gCreate gMax 1.0 printer. One thing I stress in the video is that while I have a VERY large print area at my disposal and could have printed a few of these simultaneously, I choose to break up prints like this into more bite size chucks. This way a failure on one component doesn’t potentially wreck the entire print. It’s also crucial that your printed is printing dimensionally accurate to be able to get the pins to fit in. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel If you like what we are doing here at Practical Printing, please be sure to subscribe and give us a big thumbs up!!! Find me on Twitter @crussty

This is a follow up video on the AstroPrint AstroBox where I take some time to get a little bit deeper into the user interface. We explore the AstroBox dashboard as well as the AstroPrint cloud dashboard. It’s a bit long, so you may want to grab your beverage of choice and settle into a comfy chair. If you like what we are doing here at Practical Printing, please subscribe and give us a big thumbs up!!! Find me on Twitter @crussty For anyone looking for more information on AstroPrint, some good places to start are: Website: https://www.astroprint.com Forums: https://forum.astroprint.com Twitter: https://twitter.com/astroprint3D Instagram: https://instagram.com/astroprint I was awarded this AstroBox as a prize for a competition. This video is not a review or an endorsement of the product, and I have not been compensated in any way for this content.

I received the AstroBox from AstroPrint in the mail today, the prize for winning the #RaceToH2. In this video, I do an unboxing, show all the included kit and walk through the first few steps of configuring the unit to sit on your network. I will try to do a follow up video once I get it connected to the H2 and show the inner workings of the AstroPrint dashboard. I think I interchanged AstroPrint and AstroBox a few times in the video. To clarify, AstroPrint is the company/software/service, AstroBox is the piece of hardware it runs on. If your missed the RaceToH2 live stream build of the SeeMeCNC H2 printer, you can catch it over on #3dptonight at: https://youtu.be/wNvMa72nE_w If you like what we are doing here at Practical Printing, please subscribe and give us a big thumbs up!!! Find me on Twitter @crussty

Just wanted to put out a quick video to send Much Mahalo to everyone involved in the #RaceToH2. This was a first of it's kind live multi-person live build/race of the #SeeMeCNC H2 Hacker Series printer kit. The event was by hosted JAT.MN on 3D Printing Tonight, with special guest appearances by Joel Telling, the 3D Printing Nerd, Simone and numerous peeps from SeeMeCNC. If you missed the stream live, you can catch it on #3dptonight at: https://youtu.be/wNvMa72nE_w *** Special Guests *** 3D Printing Nerd - http://youtube.com/3dprintingnerd Simone - https://www.youtube.com/user/fntsmn Maybe More? *** Sponsors *** * SeeMeCNC - https://www.seemecnc.com/ * FilamentOne - https://www.filamentone.com/ * AstroPrint - https://www.astroprint.com/ * CHEP 3D Printing - https://www.youtube.com/user/beginner...v If you like what we are doing here at Practical Printing, please subscribe and give us a big thumbs up!!! Find me on Twitter @crussty

This is part 2 of our special Valentine's Day edition. If you missed part 1, you can see it here: https://youtu.be/d0PpkU1GyCA Part 2 was printed using Sharron, my Monoprice MakerSelect V2. If you like what we are doing at the Practical Printing Channel, please give us a thumbs up and subscribe! Don't forget to tune into 3D Printing Tonight on 2/18/2017 @ 8:30 am Pacific time for the first ever live build race stream of the SeeMeCNC H2 Hacker Series printers! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

This is part one of our special Valentine's Day edition. We hope you enjoy. Subscribe and tune in for Part two! This episode was printed using Ozzy, a highly modified original gMax 1.0 on steroids. Don't forget to tune into 3D Printing Tonight on 2/18/2017 @ 8:30 am Pacific time for the first ever live build race stream of the SeeMeCNC H2 Hacker Series printers! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

While doing the prints for Episode 2, I got a chance to show that not everything goes as planed. This is how we make pasta in my house! All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

Follow up time lapse of the the Episode 2: Parts bin video All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

In preparation for the Race to H2 (hosted on 3D Printing Tonight) on 18 February 2017, I made these disposable parts bins to sort out the pieces for each step. All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

Unboxing of the SeeMeCNC H2 Hacker series delta printer and a tease on an upcoming special event to be hosted on 3D Printing Tonight with JAT.MN. Subscribe to this channel for more teasers and info on the "Big Event," or checkout 3D Printing Tonight with JAT.MN. https://www.youtube.com/channel/UC6JyY2ns5FOFotH88RGqNEw

All Thingiverse model files shown in our videos will be saved to this collection: http://www.thingiverse.com/Crussty/collections/practical-printing-channel Royalty Free Music from: http://www.bensound.com/royalty-free-music Find me on Twitter @crussty

Welcome to Practical Printing! This is just a short introductory video to give you an idea about the direction I plan on taking with the videos. As this is a new channel, please stand with us as it evolves!